Motor Feedback Oct - Beckhoff AX8000 Series Operating Instructions Manual

Electrical installation

Motor feedback OCT

9.10
ZS4800-2013
9.10.1
AX81xx and AX8206
74 ───
For the axis modules AX81xx and AX8206 you need a combined
motor connector and feedback connector. The connector is part of
the preassembled Beckhoff motor cable.
Maximum output current for the motor brake B- and B+
AX8108 and AX8206 = 1 A
AX8118 = 2 A
• X13 slot and X23 slot on AX81xx and AX8206 axis modules
Terminal point Connection
PE Protective conductor
U Motor connection U
V Motor connection V
W Motor connection W
T- OCT- or Temperature -
Possible temperature sensors:
KTY 83-1xx, KTY 84-1xx, KTY 21-6 or PT1000
T+ OCT+ or Temperature +
Possible temperature sensors:
KTY 83-1xx, KTY 84-1xx, KTY 21-6 or PT1000
B- Motor brake GND
B+ Motor brake +
Wire cross-section
Maximum 6 mm²
AWG 8
Mounting
Push in
AX8000 Version: 1.1