Dc Link - Beckhoff AX8000 Series Operating Instructions Manual

DC link

9.7
ZS4800-2001
9.7.1
AX8620
ZS4800-2042
9.7.2
AX8640
Version: 1.1
No external DC link group possible
In order to avoid damaging the AX8000 multi-axis servo system, an
external DC link group with a servo drive from the AX5000 series is
not permissible.
• X01 slot on AX8620 power supply modules
Terminal point Connection
n.c. Not used
R Brake resistor +
B+
DC link potential DC+
Wire cross-section
Maximum 6 mm²
AWG 8
Mounting
Screws with tightening torque
0.5 Nm – 0.6 Nm / 4.4 lbf in – 5.3 lbf in
• X02 slot on AX8640 power supply modules
Terminal point Connection
DC - DC link -
R DC link +
B+
Wire cross-section
Maximum 16 mm²
AWG 6
Mounting
Screws with tightening torque
1.2 Nm – 1.5 Nm / 10.6 lbf in – 13.3 lbf in
AX8000
Electrical installation
─── 69