Mechanical Installation - Beckhoff AX8000 System Manual

Mechanical Installation

8 Mechanical Installation
Danger of injury through electrocution!
Injuries can be sustained through electrocution during the mounting and commissioning of
the AX8000 multi-axis servo system.
WARNING
The installation may only be carried out by trained and qualified technical personnel who
are well-versed in electrical and automation technology. Furthermore, the national accident
prevention regulations must be adhered to.
Take the following measures to avert danger:
• Wear personal protective equipment (PPE).
• Before starting work, read the section For your safety [} 13] carefully.
• Place the electrical environment (servo drive, control cabinet, etc.) in a safe, voltage-
free state.
ð Remove all relevant mains fuses.
ð Turn off the main switch and secure it against being turned on again.
ð Put up a warning sign.
• The control and power connections for the motors may be live, even if the motor is pre-
vented from rotating by the internal brake.
Destruction of the servo drive!
Observe the following notes to avoid damage to or destruction of the components during
the mechanical installation of the AX8000 multi-axis servo system:
Attention
• Always install the servo drive vertically.
• Provide adequate ventilation for the servo drive. The permissible environmental condi-
tions can be found in the section "Environmental and operating conditions [} 29]".
• It is essential to adhere to the required distances (see diagrams below).
38
All manuals and user guides at all-guides.com
Version: 1.0 AX8000 - system manual