Version Numbers; Scope Of The Documentation - Beckhoff AX8000 Series Operating Instructions Manual

Version numbers

1.2
Scope of the documen-
1.3
tation
Version: 1.1
Provision of revision levels
On request, you can obtain a list of revision levels for changes in
the operating instructions.
• Send your request to: info@beckhoff.de
Origin of the document
These operating instructions were originally written in German. All
other languages are derived from the German original.
Product features
Only the product properties specified in the current operating in-
structions are valid. Further information given on the product pages
of the Beckhoff homepage, in emails or in other publications is not
authoritative.
Apart from these operating instructions, the following documents are
part of the overall documentation:
AX8000
Translation of the original instruc-
tions;
this documentation
Commissioning under TwinCAT3 Commissioning tutorial under
CoE object description
Diagnostic messages
AX2090-BW80-xxxx brake resis-
tors
AX8000
Documentation notes
Definition
Description of the mechanical
and electrical parameters as well
as all information necessary for
the use, installation and mount-
ing of the AX8000 multi-axis
servo system
TwinCAT3 including user infor-
mation on the TC DriveManager
2 and a description of the safety
function STO (Safe Torque Off)
over FSoE (Safety over Ether-
CAT)
Documentation of the CAN over
EtherCAT objects with attribute
tables
Documentation of the error mes-
sages of the AX8000 multi-axis
servo system with attribute ta-
bles, problem descriptions and
possible solutions
Operating instructions for the use
and installation of the AX2090-
BW80 brake resistors as acces-
sories for the AX8000 multi-axis
servo system
─── 7