Beckhoff AX8000 Series Operating Instructions Manual page 59

AX8640
9.2.2
Number
1
2
3
4
5
6
7
8
9
10
Version: 1.1
9.2.2
Explanation
Connection socket for incoming EtherCAT cable
Connection socket for outgoing EtherCAT cable
Measuring and test contacts on the devices
Quick coupling of the AX8000 multi-axis servo system; AX bridge
Optional brake resistor
When using an optional brake resistor on the AX8000 multi-axis servo system, the
bridge of the 10-pin supply plug "X01" between R
Fuses F5 and F6 for optional brake resistor
If you add the optional brake resistor, the cable must be protected by the fuses F5
and F6.
Schematic contacts on the 7-pin supply plug "X02"
Power supply unit with 24 V
Optional mains choke
Schematic contacts on the 4-pin supply plug "X01"
and R
B-
supply voltage
DC
AX8000
Electrical installation
must be removed
Bint
─── 59