Maintenance And Cleaning; Intervals - Beckhoff AX8000 Series Operating Instructions Manual

Multi-axis servo system

Hide thumbs Also See for AX8000 Series:

User information (246 pages)

Operating instructions manual (116 pages)

System manual (67 pages)

Table Of Contents

Table of Contents

Intervals

11.1

Version: 1.1

WARNING

Ensure safe condition for cleaning work

Basically, electronic devices are not fail-safe. The condition is al-

ways safe when the unit is switched off and not energized. For

cleaning work, place the connected servo drives and the machine

in a safe state.

Carrying cleaning work during operation can lead to serious or fa-

tal injuries.

Do not immerse or spray the servo drives

Wipe off the servo drives only with a cleaning agent and a cloth.

Cleaning by immersion will destroy the servo drive. Impermissible

solutions will damage the servo drives and surfaces.

The components of the AX8000 multi-axis servo system are mainte-

nance-free. However, dirt, dust or swarf can negatively affect the

function of the components. In the worst case, contamination can

lead to failure. Therefore, clean the components regularly and care-

fully with a cloth or brush.

All modules are maintenance-free

The modules from the AX8000 multi-axis servo system are subject

to protection class IP20 and may only be installed and operated in

accordance with the "specifications for operation and environment",

[Page 28].

Operation beyond the permissible environmental conditions and op-

erating states will shorten the service life of the components of the

AX8000 multi-axis servo system.

The service life of consumables may be shortened depending on the

mechanical dynamics due to mounted devices and movements.

AX8000