Table of Contents
Advertisement
Mechanical installation
Requirements
9.1
Evenness
9.1.1
84
───
All work should be carried out with great care and without time pres-
sure.
When designing and dimensioning the machine or system, observe
the basic requirements for the machine bed and the assembly of the
coil part and magnetic plates.
The specified mounting height is based on the specified evenness.
The following figure shows the values for evenness and parallelism
for the coil unit and the magnetic plate.
Position
1
2
3
4
Please refer to Chapter "Air gap, section Overall mounting height",
[Page 70]
AL8000
Description
Machine slide
Coil part
Magnetic plate
Machine bed
Version: 1.7
Advertisement
Table of Contents
