Intended Use - Beckhoff AX8000 Series Operating Instructions Manual

Product overview

Intended use

3.6
Improper use
3.6.1
26 ───
The modules of the AX8000 multi-axis servo system may be oper-
ated only for the intended activities defined in this documentation,
taking into account the prescribed environmental conditions.
The components are to be installed only in closed control cabinets in
electrical plants or machines and put into operation only as inte-
grated components of the plant or machine.
Read the entire drive system documentation:
• This translation of the original instructions
• Complete machine documentation provided by the machine
manufacturer
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The modules of the AX8000 multi-axis servo system are not suitable
for use in the following areas:
• ATEX zones without suitable housing
• Areas with aggressive environments, for example aggressive
gases or chemicals
The relevant standards and directives for EMC interference emis-
sions must be complied with in residential areas.
AX8000 Version: 1.1