Beckhoff AX8000 Series Operating Instructions Manual page 63

Module connection
9.3.1
+ DC
- DC
1
2
3
1
+ DC
- DC
5
1
Version: 1.1
9.3.1
The connection of the individual modules in a drive system takes
place via the grounding hangers 1. These are each mechanically
locked to the right-hand earthing bolt of the module and swiveled
onto the left-hand earthing bolt of the adjacent module, where they
are mechanically locked by the nuts and serrations.
► Push the grounding hanger 1 onto the earthing bolt 2 of the right-
hand module
► Make sure that the opening in the grounding hanger 1 is facing
upwards
2
► Screw the nut 3 onto the earthing bolt 2 on top of the grounding
hanger 1
► Do not use a spring washer 4
4
► Swivel the grounding hanger 1 onto the earthing bolt 5 of the left-
hand module
Electrical installation
AX8000 ─── 63