Replacement - Western Digital Ultrastar Serv60+8 User Manual

User Guide
4.10 M.2 Replacement
Table 45: Procedure Info
Required Tools
•
T7 Torx Screwdriver
Step 1 : Uncable the CMA(s).
a. Open all of the basket clips on the CMA(s).
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
Step 2 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
b. To release a connector, press the blue latch release button and pull the connector free.
•
Figure 198: Open Baskets
arm.
There are three total connections that need to be released, one at the elbow and two
at the opposite end.
Required Parts
T7 Torx screws
4. Part Replacement
4.10 M.2 Replacement
# of People Required Time Required
3 1h 30m
176