Western Digital Ultrastar Serv60+8 User Manual page 273

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 8 : Remove all of the drives from the chassis before uninstalling the chassis. Be prepared to label the

drives as they are removed so they can be reinstalled in the same location in the new chassis.

Step 9 : Follow these steps to remove a Drive Assembly.

a. Find the latch release mechanism on the Drive Assembly being removed.

b. Insert a finger and a thumb into the latch release and pinch to unlatch the Drive Assembly.

c. Lift the Drive Assembly free from the enclosure.

Figure 324: Chassis Handle Operation

Figure 325: Unlatch Drive Carrier (IOM Not Shown)

4. Part Replacement

4.14 Chassis Replacement