User Guide
b. Remove the server cover panel by carefully pulling on the edge where the screws were
removed.
Step 23 : Uninstall the server cover panel in the same manner as the first.
Step 24 : Uninstall the fan bay.
a. Remove the screw that secures the fan bay to the chassis.
b. Locate the pin that secures the outside of the fan bay to the chassis and pull the pin out
and pull up on the fan bay until the cage is clear of the chassis.
Figure 339: Removing the Server Cover Panel
Figure 340: Removing the Fan Bay Screws
4. Part Replacement
4.14 Chassis Replacement
272