Western Digital Ultrastar Serv60+8 User Manual page 77

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 4 : Remove the new IOM from its packaging.

Step 5 : Install the IOM.

b. Ensure that the handles on the IOM are not latched. To unlatch them, press the latch

release in the direction shown in the following image.

Figure 41: Removing IOM

Caution: If a pin on the IOM's internal connectors is bent or damaged, the

IOM will have to be replaced. For this reason it is imperative that the IOM is

not forced into position, that it is inserted straight, and that the directions for

installing the IOM are followed exactly.

4. Part Replacement

4.2 IOM Replacement