Western Digital Ultrastar Serv60+8 User Manual page 139

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

a. Align the first fan bay within the location that in which it was uninstalled.

b. Slide the fan bay into the chassis taking care not to pinch or damage any cables.

c. Ensure that the pin located on the inside of the fan bay is latched onto the chassis during

the process of seating the fan bay. If the pin did not engage, use a Flathead screwdriver

to disengage the pin by pulling it out and repositioning the fan bay until the pin engages

with the chassis.

Figure 135: Installing the Fan Bay

4.8 CPU and Heat Sink Module Replacement

4. Part Replacement