Western Digital Ultrastar Serv60+8 User Manual page 258

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

4. Part Replacement

4.13 Rails Replacement

Figure 305: Screw Installation Location

Step 21 : CMA Standard: Install the two rack latch brackets at the front of the rack.

a. Orient the brackets so that the screw holes are between the two pins supporting the

outer rails as shown in the following image. There is a left and a right. Use the image

below as a guide for how to orient this bracket and mirror it for the other side. Notice the

increased distance between the top two screw holes and the lower screwholes and the

flange being oriented on the outside.