Western Digital Ultrastar Serv60+8 User Manual page 191

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

a. Locate the M.2 installed on the baseboard.

b. Remove the Philips head screw that secures the M.2 to the baseboard.

c. Pull the top M.2 out of the connector.

d. Repeat the previous substep to remove the bottom M.2.

Step 13 : Install the M.2.

a. Locate the M.2 connectors on the baseboard.

Figure 207: M.2 Screw

Figure 208: Uninstalling the M.2s

4. Part Replacement

4.10 M.2 Replacement