Western Digital Ultrastar Serv60+8 User Manual page 85

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 5 : Remove the new System Fan from its packaging.

Step 6 : Install the System Fan.

a. Lift the System Fan flap and look inside the empty slot that will receive the System Fan

and orient the System Fan so that the connector on the bottom of the fan is on the proper

b. Lower the fan down into the empty slot. Do not force it.

Figure 54: Removing System Fans

Figure 55: Lift the System Fan Flap

4. Part Replacement

4.4 System Fan Replacement