Western Digital Ultrastar Serv60+8 User Manual page 291

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

c. Firmly press the DIMM into the slot until the ejector tabs snap into place over the notches

on either side of the DIMM.

Step 34 : Install the CPU and Heat Sink module.

a. Locate the socket alignment pin on the baseboard and the alignment hole on the Heat

b. Carefully place the CPU and Heat Sink module in position on the socket alignment pins.

Figure 356: Installing the DIMM into the DIMM Slot

Figure 357: DIMM Notches

4. Part Replacement

4.14 Chassis Replacement