Western Digital Ultrastar Serv60+8 User Manual page 227

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 8 : Follow the previous step for each drive in the enclosure. Attach a label or mark the drives with

the drive slot they were removed from in order to add them to the same slot in the future. Store

the drives in an ESD safe location until the drives are ready to be installed back into an enclosure.

Step 9 : Release the safety latch on the inner rails on each side of the chassis as shown in the following

Step 10 : Remove the chassis from the rack.

Figure 258: Removing Drive Assembly

Figure 259: Inner Rail Safety Latch Release

4. Part Replacement

4.12 CMA Replacement