Western Digital Ultrastar Serv60+8 User Manual page 270

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

4. Part Replacement

4.14 Chassis Replacement

Figure 319: CMAs in service position (Cables not shown)

Step 2 : Disconnect the Enclosure from power.

a. Locate the redundant PSUs at the rear of the enclosure.

b. Detach the cable retention clip from both power cords.

Figure 320: Cable Retention Mechanism

c. Power down the enclosure by disconnecting both power cables, one from each PSU.