Western Digital Ultrastar Serv60+8 User Manual page 104

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

4. Part Replacement

4.7 DIMM Replacement

Figure 84: Removing the Fan Bay Screw

b. Locate the pin that secures the outside of the fan bay to the chassis and pull the pin out

and pull up on the fan bay until the cage is clear of the chassis.

Note: The fan bay is connected to the baseboard with a cable and does

not need to be disconnected. When removing the fan bay to replace

DIMMs, lay the assembly on the drive cage.