Western Digital Ultrastar Serv60+8 User Manual page 147

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

c. Slowly slide the enclosure forward to ensure the arm is operating properly, then slide it

back into the rack.

a. CMA Standard: Repeat these steps to install the upper arm with the elbow facing to the

Step 31 : Install the Drive Assembly.

a. Ensure that the enclosure has been pulled out of the rack until the rail latches engage.

b. Find the LED pointer on the top of the drive carrier. This pointer should point toward the

front of the unit as shown in the following image.

Figure 147: CMA Orientation

4.8 CPU and Heat Sink Module Replacement

4. Part Replacement