Western Digital Ultrastar Serv60+8 User Manual page 152

User Guide
4.9 Heat Sink Replacement
Note: The Heat Sink is not hot swappable. The enclosure must be powered-down,
disconnected from all cabling, and removed from the rack before replacing the Heat Sink.
Table 44: Procedure Info
Required Tools
•
T30 Torx Screwdriver
•
Plastic Spudger
(not provided)
•
Isopropyl Alcohol
and lint-free wipes
(not provided)
Step 1 : Uncable the CMA(s).
a. Open all of the basket clips on the CMA(s).
Required Parts
•
T30 Torx screws
Figure 152: Open Baskets
4. Part Replacement
4.9 Heat Sink Replacement
# of People Required Time Required
3 ~2h
143