Western Digital Ultrastar Serv60+8 User Manual page 170

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 22 : Install the System Fan base.

a. Slide the system fan base down over the CPUs until the base rests on the baseboard.

b. Slide the LED cable and LED bracket into the Heat Sink channel and snap it into place at

the top of the Heat Sink.

c. Install the remaining LED bracket in the same manner as the first.

Step 23 : Install the System Fan Bay.

a. Slide the system fan bay down over the CPUs until the captive screws line up with screw

holes on the Heat Sink.

Figure 177: Heat Sink Installation Order

Figure 178: Installing the CPU LED Brackets

4. Part Replacement

4.9 Heat Sink Replacement