Western Digital Ultrastar Serv60+8 User Manual page 210

User Guide
Step 12 : Uninstall the add-in cards.
a. Locate the first add-in card.
b. Remove all cabling from the add-in card.
c. Carefully pull up on the add-in card until it comes free from the connector on the
baseboard.
Step 13 : Install the add-in cards.
a. Locate the connector for the add-in card being installed.
b. Set the card edge of the add-in card on the connector and firmly press down until the
add-in card is seated.
Figure 234: Add-In Card Bracket Removed
Figure 235: Add-In Card Remove Cabling and Uninstall
4. Part Replacement
4.11 Add-in Card Replacement
201