Western Digital Ultrastar Serv60+8 User Manual page 288

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

c. Pull the top M.2 out of the connector.

d. Repeat the previous substep to remove the bottom M.2.

Step 31 : Uninstall the add-in card bracket.

a. From the rear of the enclosure, remove the eight screws that secure the add-in cards to

the enclosure using a T10 Torx Screwdriver.

Figure 350: M.2 Screw

Figure 351: Uninstalling the M.2s

4. Part Replacement

4.14 Chassis Replacement