Western Digital Ultrastar Serv60+8 User Manual page 110

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

b. Align the fan bay within the location that in which it was uninstalled.

c. Slide the fan bay into the chassis taking care not to pinch or damage any cables.

d. Ensure that the pin located on the inside of the fan bay is latched onto the chassis during

the process of seating the fan bay. If the pin did not engage, use a Flathead screwdriver

to disengage the pin by pulling it out and repositioning the fan bay until the pin engages

with the chassis.

Figure 93: Installing the Plenum

Figure 94: Installing the Fan Bay

4. Part Replacement

4.7 DIMM Replacement