Overview To Installing The Switch In An Equipment Rack; Figure 13: At-Rkmt-J14 Brackets And Switch; Figure 14: At-Rkmt-J15 Bracket - Allied Telesis XS900MX Series Installation Manual

XS900MX Series Installation Guide for Stand-alone Switches

Overview to Installing the Switch in an Equipment Rack

You can install XS900MX Switches in a 19-inch equipment rack two ways.
One way is with the AT-RKMT-J14 brackets that come with the switch.
Refer to Figure 13.
Figure 13. AT-RKMT-J14 Brackets and Switch
For installation instructions, refer to "Installing the Switch in an Equipment
Rack with AT-RKMT-J14 Brackets" on page 45.
You can also install the switch in an equipment rack with the optional AT-
RKMT-J15 bracket. Refer to Figure 14.
Figure 14. AT-RKMT-J15 Bracket
43