Overview Of Installing The Switch In An Equipment Rack; Figure 15: At-Rkmt-J14 Brackets And Switch; Figure 16: At-Rkmt-J15 Bracket - Allied Telesis AT-x550-18XTQ Installation Manual

x550 Series Installation Guide for Virtual Chassis Stacking

Overview of Installing the Switch in an Equipment Rack

You can install the switch in a 19-inch equipment rack two ways. One way
is with the two AT-RKMT-J14 brackets that come with the switch. Refer to
Figure 15.
Figure 15. AT-RKMT-J14 Brackets and Switch
For installation instructions, refer to "Installing the Switch in an Equipment
Rack with the AT-RKMT-J14 Brackets" on page 59
You can also install the switch in an equipment rack with the optional AT-
RKMT-J15 bracket. Refer to Figure 16.
Figure 16. AT-RKMT-J15 Bracket
57