Leds; Leds For The Twisted Pair Ports; Leds For The Sfp Slots; Figure 5: Leds For The Twisted Pair Ports On The Xs916Mx Series Switch - Allied Telesis AT-XS916MXT Installation Manual

LEDs

LEDs for the
Twisted Pair
Ports
LEDs for the SFP
Slots
This section describes the functions of the LEDs.
The twisted pair ports on the XS916MX series switch has one status LED
that displays link and activity information. The LEDs are shown in Figure 5.
Status LED for the Top Port
Figure 5. LEDs for the Twisted Pair Ports on the XS916MX Series Switch
The Port LEDs are described in Table 2.
Table 2. LEDs on the Twisted Pair Ports on the XS916MX Series Switch
LED State
Solid Green
Flashing
Green
Solid Amber
L/A LED
Flashing
Amber
Off
The LEDs for the SFP slots are located between the slots, as shown in
Figure 6 on page 26. Each SFP slot has one LED. The left-hand LED is for
the top slot and the right-hand LED is for the bottom slot.
XS916MX Series Installation Guide for Stand-alone Switches
Status LED for the Bottom Port
Description
A port has established a 10Gbps link to a
network device.
A port is transmitting or receiving data at
10Gbps.
A port has established a 100 or 1000 Mbps
link to a network device.
A port is transmitting or receiving data at
100 or 1000 Mbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
25