Leds; Figure 4: Link And Activity Leds For The 1Gbps/10Gbps Ports On The At-X550-18Xtq, Switch; Table 4: Link And Activity Leds For The 1Gbps/10Gbps Ports On The At-X550-18Xtq Switch - Allied Telesis x550 Series Installation Manual

Table 3. Cable Requirements for the 1Gbps/10Gbps Twisted Pair Ports
Standard TIA/EIA 568-B-compliant
Category 6 shielded cabling.
Standard TIA/EIA 568-B-compliant
Category 6a shielded cabling.
Refer to Table 24 on page 130 for the port pinouts of the twisted pair ports.

LEDs

Each 1Gbps/10Gbps twisted pair port on the AT-x550-18XTQ Switch. has
an LED that displays link and activity information. The LED is shown in
Figure 4.
Figure 4. Link and Activity LEDs for the 1Gbps/10Gbps Ports on the AT-
The states of the link and activity LEDs are described in Table 4.
Table 4. Link and Activity LEDs for the 1Gbps/10Gbps Ports on the AT-
Solid Green
Flashing Green
Solid Amber
on the AT-x550-18XTQ Switch (Continued)
Cable Type
Top Port LED
x550-18XTQ, Switch
x550-18XTQ Switch
State
The port has established a 10Gbps link to
a network device.
The port is transmitting or receiving data
at 10Gbps.
The port has established a 1Gbps link to a
network device.
x550 Series Installation Guide for Stand-alone Switches
1Gbps
Yes
Yes
Bottom Port LED
Description
10Gbps
No
Yes
23