Firewire Interface; Table 2-6: Firewire Card Part Numbers; Table 2-7: Firewire Repeaters (For Cables Exceeding 4.5 M (15 Ft) Specification); Table 2-8: Firewire Cables (Copper And Glass Fiber) - Aerotech A3200 Nmark GCL Hardware Manual

Installation and Configuration

2.3. FireWire Interface

The FireWire bus is the high-speed communications connection to the Nmark GCL operating at 400
megabits per second. All command and configuration information is sent via the FireWire port.
Table 2-6: FireWire Card Part Numbers
Part Number
NFIRE-PCI
NFIRE-PCIE
NFIRE-PCI-TI-LP
NFIRE-PCIE-GOF
Table 2-7: FireWire Repeaters (for cables exceeding 4.5 m (15 ft) specification)
Part Number
NFIRE-RPTR-1394A-1394A
NFIRE-RPTR-1394A-GOF
Table 2-8: FireWire Cables (copper and glass fiber)
Part Number
NCONNECT-60
NCONNECT-45
NCONNECT-30
NCONNECT-15
NCONNECT-9
NCONNECT-10000-GOF
NCONNECT-15000-GOF
NCONNECT-20000-GOF
NCONNECT-30000-GOF
24
Description
OHCI compliant FireWire PCI interface card, 3 port
OHCI compliant FireWire PCIe x1 interface card, 2 port
Low Profile, OHCI compliant, PCI
FireWire PCIE X1 Glass Optical Fiber Board
Description
Extender for copper cable lengths greater than 4.5 m (15 feet).
Glass Optical Fiber FireWire Repeater, Qty. 1 (Fiber Cable not included)
Description
6 m (20 ft) long, 6 pin to 6 pin
4.5 m (15 ft) long, 6 pin to 6 pin
3 m (10 ft) long, 6 pin to 6 pin
1.5 m (5 ft) long, 6 pin to 6 pin
0.9 m (3 ft) long, 6 pin to 6 pin
10 m (32.8 ft), glass fiber optical cable
15 m (49.2 ft), glass fiber optical cable
20 m (65.6 ft), glass fiber optical cable
30 m (101.7 ft), glass fiber optical cable
Chapter 2
Nmark GCL Hardware Manual
www.aerotech.com