Table of Contents
Advertisement
3.1.4.4.2
TABLE_COPY (0x45)
Tables will be copied.
The target may not be identical to the source.
A table can not be specified either as the target nor as the source of the
copying command when transfer using DLD_START, DLD_CONT or
DLD_END has not been completed. Writing of the EEPROM is performed in
the background, independent of processing of the table command (see also
DIAG_QUERY_STORAGE).
The tables located in the EEPROM are always copied to RAM 1 when the
system is started up. This command can not be used for copying out of the
EEPROM.
A configuration table can not be copied with this command (see also
CFG_SAVE, CONFIG_RESTORE).
Copying options:
1. RAM RAM
2. RAM EERPOM
WAGO-I/O-SYSTEM 750
I/O Modules
Reference Commands – Mailbox Commands
Table Management Commands
• 135
Advertisement
Table of Contents
