WAGO Kontakttechnik GmbH & Co. KG declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual.
Routines or advice for efficient use of the device and software optimization. More information References on additional literature, manuals, data sheets and INTERNET pages 1.3 Number Notation Number Code Example Note Decimal normal notation Hexadecimal 0x64 C notation Binary '100' Within ', '0110.0100' Nibble separated with dots WAGO-I/O-SYSTEM 750 I/O Modules...
Do not use any contact spray. The spray may impair the functioning of the contact area. The WAGO-I/O-SYSTEM 750 and its components are an open system. It must only be assembled in housings, cabinets or in electrical operation rooms. Access must only be given via a key or tool to authorized qualified personnel.
2.1.1.2 Description The binary spacer module reserves digital addresses in the WAGO buscoupler. The number of inputs or outputs can be selected by two DIP switches. 2, 4, 6 or 8 bits are possible (equivalent to 1, 2, 3 or 4 two-channel modules). A third DIP Switch selects inputs or outputs.
C off A, C data width green A off 6 bits (3 x 2 bits) C on Fig. 2.1.1-3: Display A on 8 bits (4 x 2 bits) Elements C on g062203x input operating green mode output WAGO-I/O-SYSTEM 750 I/O Modules...
EN 50082-2 (1996) EMC-Emission of interference (CE) acc. to EN 50081-1 (1993) Approvals (cf. Chapter 2.2 of the Coupler/Controller Manual) (UL508) (UL1604) Class I Div2 ABCD T4A KEMA II 3 G EEx nA II T4 Conformity Marking WAGO-I/O-SYSTEM 750 I/O Modules...
Page 10
750-622 [Binary Spacer Module] Technical Data More Information Detailed references to the approvals are listed in the document "Overview Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM ELECTRONICC Tools and Docs (Item-No.: 0888-0412) or in the internet under: www.wago.com...