Receiving Calls - Mitsubishi Endeavor Owner's Manual

Features and controls
Redialing
You can redial the last number called, based on the history of
dialed calls in the paired cellular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say "Redial."
SEND function
During a call, press the SPEECH button to enter the voice rec-
ognition mode and then say "{number string} SEND" to gener-
ate a DTMF tone.
For example, if during a call you need to simulate the press of a
3
phone button as a response to an automated system, press the
SPEECH button and speak "1 2 3 4 pound SEND" and the
1234# will be sent on your cellular phone.
3-178
Switching between hands-free mode and private
mode
N00507800015
®
The Bluetooth
(Hands-free calls) and private mode (calls using cellular
phone).
If you press the SPEECH button and say "Transfer call" during
a Hands-free call, you can stop the Hands-free mode and talk in
private mode on your cellular phone.
N00508000027
To return to Hands-free mode, press the SPEECH button again
and say "Transfer call."

Receiving calls

If an incoming phone call is received while the ignition switch
is in the "ACC" or "ON" position, the audio system will be
automatically turned on and Incoming Call will be played,
even when the audio system was originally off.
The voice guide announcement for the incoming call will be
output from the front passenger's seat speaker.
If the CD player or radio was playing when the incoming call
was received, the audio system will mute the sound from the
CD player or radio and output only the Incoming Call.
To receive the call, press the PHONE button on the overhead
console control switch.
When the call is over, the audio system will return to its previ-
ous state.
HFP can switch between Hands-free mode
N00508100031
N00508200032