Measure:npulses - Keysight InfiniiVision M9241A Scpi Programmer's Manual

21
:MEASure Commands

:MEASure:NPULses

Command Syntax
:MEASure:NPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:NPULses command installs a falling pulse count measurement on
screen. If the optional source parameter is not specified, the current source is
measured.
This command is not available if the source is FFT (Fast Fourier Transform).
NOTE
Query Syntax
:MEASure:NPULses? [<source>]
The :MEASure:NPULses? query measures and returns the on-screen falling pulse
count.
Return Format
<value><NL>
<value> ::= the falling pulse count in NR3 format
See Also •
•
478
(see page 1354)
"Introduction to :MEASure Commands"
":MEASure:SOURce" on page 494
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 448