Measure:nedges - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:MEASure:NEDGes

Command Syntax
:MEASure:NEDGes [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:NEDGes command installs a falling edge count measurement on
screen. If the optional source parameter is not specified, the current source is
measured.
This command is not available if the source is FFT (Fast Fourier Transform).
NOTE
Query Syntax
:MEASure:NEDGes? [<source>]
The :MEASure:NEDGes? query measures and returns the on-screen falling edge
count.
Return Format
<value><NL>
<value> ::= the falling edge count in NR3 format
See Also •
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
"Introduction to :MEASure Commands"
":MEASure:SOURce" on page 494
:MEASure Commands
on page 448
21
477