Recall:setup[:Start] - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:RECall:SETup[:STARt]

Command Syntax
:RECall:SETup[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-9; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:SETup[:STARt] command recalls an oscilloscope setup.
If a file extension is provided as part of a specified <file_name>, it must be ".scp".
NOTE
See Also •
•
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
"Introduction to :RECall Commands"
":RECall:FILename" on page 685
":RECall:PWD" on page 688
":SAVE[:SETup[:STARt]]"
on page 682
on page 713
25
:RECall Commands
689