Power:modulation:apply - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:POWer:MODulation:APPLy

Command Syntax
:POWer:MODulation:APPLy
The :POWer:MODulation:APPLy command applies the selected modulation
analysis type (:POWer:MODulation:TYPE).
The Modulation analysis measures the control pulse signal to a switching device
(MOSFET) and observes the trending of the pulse width, duty cycle, period,
frequency, etc. of the control pulse signal.
See Also •
•
•
•
•
•
•
•
•
•
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
":POWer:MODulation:SOURce"
":POWer:MODulation:TYPE"
":MEASure:VAVerage"
":MEASure:VRMS" on page 513
":MEASure:VRATio" on page 512
":MEASure:PERiod" on page 483
":MEASure:FREQuency"
":MEASure:PWIDth" on page 487
":MEASure:NWIDth" on page 479
":MEASure:DUTYcycle"
":MEASure:RISetime"
":MEASure:FALLtime"
on page 624
on page 625
on page 507
on page 475
on page 469
on page 491
on page 470
24
:POWer Commands
623