Power:psrr:trace - Keysight InfiniiVision M9241A Scpi Programmer's Manual

24
:POWer Commands

:POWer:PSRR:TRACe

Command Syntax
:POWer:PSRR:TRACe <selection>
<selection> ::= {NONE | GAIN}
The :POWer:PSRR:TRACe command specifies whether to include gain (PSRR) data
in the power supply rejection ratio analysis results.
This command affects the oscilloscope's front panel graphical user interface (plot and table)
NOTE
as well as when saving analysis data.
Query Syntax
:POWer:PSRR:TRACe?
The :POWer:PSRR:TRACe? query returns the type of data that is currently included
in the PSRR analysis results, or "NONE" if the gain data is not included.
Return Format
<selection_list><NL>
<selection_list> ::= {"NONE" | "GAIN"}
See Also •
•
642
(see page 1354)
":POWer:PSRR:APPLy"
":POWer:PSRR:DATA"
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 633
on page 634