Display:lablist - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:DISPlay:LABList

Command Syntax
:DISPlay:LABList <binary block data>
<binary block> ::= an ordered list of up to 75 labels, a maximum of 32
The :DISPlay:LABList command adds labels to the label list. Labels are added in
alphabetical order.
Labels that begin with the same alphabetic base string followed by decimal digits are
NOTE
considered duplicate labels. Duplicate labels are not added to the label list. For example, if
label "A0" is in the list and you try to add a new label called
"A1234567890123456789012345678901", the new label is not added.
Query Syntax
:DISPlay:LABList?
The :DISPlay:LABList? query returns the label list.
Return Format
<binary block><NL>
<binary block> ::= an ordered list of up to 75 labels, a maximum of 32
See Also •
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
characters each, separated by newline characters.
characters each, separated by newline characters.
"Introduction to :DISPlay Commands"
":DISPlay:LABel" on page 326
":CHANnel<n>:LABel"
on page 313
on page 280
13
:DISPlay Commands
327