Keysight InfiniiVision M9241A Scpi Programmer's Manual page 260

9
:CALibrate Commands
Table 84 :CALibrate Commands Summary (continued)
Command
n/a
n/a
Introduction to The CALibrate subsystem provides utility commands for:
:CALibrate
• Determining the state of the calibration factor protection switch
Commands
• Saving and querying the calibration label string.
• Reporting the calibration time and date.
• Reporting changes in the temperature since the last calibration.
• Starting the user calibration procedure.
260
Query
:CALibrate:TEMPeratur
page
e? (see
:CALibrate:TIME? (see
page 269)
(CAL PROTECT).
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
Options and Query Returns
<return value> ::= degrees C
268)
delta since last cal in NR3
format
<return value> ::=
<hours>,<minutes>,<seconds>; all
in NR1 format