Counter:totalize:gate:enable - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:COUNter:TOTalize:GATE:ENABle

Command Syntax
:COUNter:TOTalize:GATE:ENABle {{0 | OFF} | {1 | ON}}
The :COUNter:TOTalize:GATE:ENABle command enables or disables totalizer
gating.
When totalizer gating is enabled, the totalizer only counts edges when a second
gating signal polarity is true. The second gating signal can be one of the remaining
analog channel inputs.
Query Syntax
:COUNter:TOTalize:GATE:ENABle?
The :COUNter:TOTalize:GATE:ENABle? query returns whether totalizer gating is
enabled or disabled.
Return Format
<off_on><NL>
{0 | 1}
See Also •
•
•
•
•
•
•
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
":COUNter:CURRent"
":COUNter:ENABle" on page 298
":COUNter:MODE" on page 299
":COUNter:NDIGits" on page 300
":COUNter:SOURce" on page 301
":COUNter:TOTalize:CLEar"
":COUNter:TOTalize:GATE:POLarity"
":COUNter:TOTalize:GATE:SOURce"
":COUNter:TOTalize:SLOPe"
on page 297
on page 302
on page 304
on page 305
on page 306
11
:COUNter Commands
303