Sbus<N>:Nrz:hsize - Keysight InfiniiVision M9241A Scpi Programmer's Manual

:SBUS<n>:NRZ:HSIZe
Command Syntax
:SBUS<n>:NRZ:HSIZe <#bits>
<#bits> ::= from 0-32, in NR1 format
When the display format is WORD (see :SBUS<n>:NRZ:DISPlay), the
:SBUS<n>:NRZ:HSIZe command specifies the number of bits in the header field of
your NRZ protocol definition.
Query Syntax
:SBUS<n>:NRZ:HSIZe?
The :SBUS<n>:NRZ:HSIZe? query returns the number of header field bits setting.
Return Format
<#bits><NL>
See Also •
•
•
•
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1354)
":SBUS<n>:NRZ:DISPlay"
":SBUS<n>:NRZ:DSIZe"
":SBUS<n>:NRZ:FSIZe"
":SBUS<n>:NRZ:STARt"
":SBUS<n>:NRZ:TSIZe"
":SBUS<n>:NRZ:WSIZe"
on page 852
on page 853
on page 854
on page 860
on page 864
on page 865
27
:SBUS<n> Commands
855