Sbus<N>:Manchester:base - Keysight InfiniiVision M9241A Scpi Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:MANChester:BASE
Command Syntax
:SBUS<n>:MANChester:BASE <base>
<base> ::= {HEX | DECimal | ASCii | BINary}
When the display format is WORD (see :SBUS<n>:MANChester:DISPlay), the
:SBUS<n>:MANChester:BASE command specifies the base for the Manchester bus
decode and Lister display.
• HEX — hexadecimal
• DECimal — unsigned decimal
• ASCii
When the display format is BIT, the only legal decode base value is BINary.
Query Syntax
:SBUS<n>:MANChester:BASE?
The :SBUS<n>:MANChester:BASE? query returns the decode number base setting.
Return Format
<base><NL>
<base> ::= {HEX | DEC | ASC | BIN}
See Also •
•
•
•
830
(see page 1354)
":SBUS<n>:MANChester:BITorder"
":SBUS<n>:MANChester:IDLE:BITS"
":SBUS<n>:MANChester:LOGic"
":SBUS<n>:MANChester:STARt"
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 832
on page 836
on page 837
on page 840