Calibrate:protected - Keysight InfiniiVision M9241A Scpi Programmer's Manual

9
:CALibrate Commands

:CALibrate:PROTected

(see page 1354)
Query Syntax
:CALibrate:PROTected?
The :CALibrate:PROTected? query returns the rear-panel calibration protect (CAL
PROTECT) button state. The value PROTected indicates calibration is disabled,
and UNPRotected indicates calibration is enabled.
Return Format
<switch><NL>
<switch> ::= {"PROTected" | "UNPRotected"}
See Also • "Introduction to :CALibrate Commands" on page 260
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide 265