Sbus<N>:Can:trigger:idfilter - Keysight InfiniiVision M9241A Scpi Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:CAN:TRIGger:IDFilter
(see page 1354)
Command Syntax
:SBUS<n>:CAN:TRIGger:IDFilter {{0 | OFF} | {1 | ON}}
The :SBUS<n>:CAN:TRIGger:IDFilter command specifies, in certain error and bit
trigger modes, whether triggers are filtered by CAN IDs.
Query Syntax
:SBUS<n>:CAN:TRIGger:IDFilter?
The :SBUS<n>:CAN:TRIGger:IDFilter? query returns the CAN trigger ID filter
setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SBUS<n>:CAN:TRIGger" on page 762
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide 765