Sbus<N>:Cxpi:parity - Keysight InfiniiVision M9241A Scpi Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:CXPI:PARity
Command Syntax
:SBUS<n>:CXPI:PARity {{0 | OFF} | {1 | ON}}
The :SBUS<n>:CXPI:PARity command specifies whether the parity bit should be
displayed in the identifier field.
When OFF, the upper bit is masked. The parity is still checked, but it is not
displayed unless a parity error occurs.
Query Syntax
:SBUS<n>:CXPI:PARity?
The :SBUS<n>:CXPI:PARity? query returns the parity display setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also •
•
•
•
778
(see page 1354)
":SBUS<n>:CXPI:BAUDrate"
":SBUS<n>:CXPI:SOURce"
":SBUS<n>:CXPI:TOLerance"
":SBUS<n>:CXPI:TRIGger"
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 777
on page 779
on page 780
on page 781