Sbus<N>:Lin:trigger:symbolic:frame - Keysight InfiniiVision M9241A Scpi Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe
Command Syntax
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe <name>
<name> ::= quoted ASCII string
The :SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe command specifies the message to
trigger on when LIN symbolic data has been loaded (recalled) into the oscilloscope
and the LIN trigger mode is set to FRAMe or FSIGnal.
Query Syntax
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe?
The :SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also •
•
•
•
818
(see page 1354)
":RECall:LDF[:STARt]"
":SBUS<n>:LIN:TRIGger"
":SBUS<n>:LIN:TRIGger:SYMBolic:SIGNal"
":SBUS<n>:LIN:TRIGger:SYMBolic:VALue"
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 686
on page 811
on page 819
on page 820