Keysight InfiniiVision M9241A Scpi Programmer's Manual page 4

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Chapter 12, ":DEMO Commands," starting on page 307, describes commands
that control the education kit demonstration signals that can be output on the
oscilloscope's Demo 1 and Demo 2 terminals.
Chapter 13, ":DISPlay Commands," starting on page 311, describes commands
that control how waveforms, graticule, and text are displayed and written on
the screen.
Chapter 14, ":DVM Commands," starting on page 333, describes commands
that control the digital voltmeter analysis feature.
Chapter 15, ":EXTernal Trigger Commands," starting on page 339, describes
commands that control the input characteristics of the external trigger input.
Chapter 16, ":FRANalysis Commands," starting on page 345, describes
commands that control oscilloscope functions associated with the Frequency
Response Analysis (FRA) feature, which is available is with the license-enabled
built-in waveform generator).
Chapter 17, ":FUNCtion<m> Commands," starting on page 361, describes
commands that control math waveforms.
Chapter 18, ":HCOPY Commands," starting on page 403, describes commands
that set and query the selection of hardcopy device and formatting options.
Chapter 19, ":LISTer Commands," starting on page 407, describes commands
that turn on/off the Lister display for decoded serial data and get the Lister
data.
Chapter 20, ":MARKer Commands," starting on page 411, describes commands
that set and query the settings of X-axis markers (X1 and X2 cursors) and the
Y-axis markers (Y1 and Y2 cursors).
Chapter 21, ":MEASure Commands," starting on page 433, describes
commands that select automatic measurements (and control markers).
Chapter 22, ":MEASure Power Commands," starting on page 519, describes
measurement commands that are available when the DSOX4PWR power
measurements and analysis application is licensed and enabled.
Chapter 23, ":MTESt Commands," starting on page 543, describes commands
that control the mask test features provided with Option LMT.
Chapter 24, ":POWer Commands," starting on page 577, describes commands
that control the DSOX4PWR power measurement application.
Chapter 25, ":RECall Commands," starting on page 681, describes commands
that recall previously saved oscilloscope setups, reference waveforms, or
masks.
Chapter 26, ":SAVE Commands," starting on page 691, describes commands
that save oscilloscope setups, screen images, and data.
Chapter 27, ":SBUS<n> Commands," starting on page 721, describes
commands that control oscilloscope functions associated with the serial
decode bus and serial triggering.
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide